ABOUT ATF
ATF is a two-cell automated indoor vegetable planter that grows mainly marijuana in addition to growing tomatoes, chili and dozens of other vegetables. Unlike other types of equipment, ATF requires no professional agronomic skills or good knowledge of the vegetation process. All operations related to photosynthesis are written and fully automated. Our customers can easily control and monitor the cultivation cycle with smartphones. There are two vegetation cells that allow to grow two large plants in sequence.
MISSION
The aim of the project is to make it possible for everyone to eat organic food and stop pollution of the Earth with chemicals of agriculture, by creating a mass production of ATF equipment for home and industrial year-round plant growing in enclosed spaces using the developed technology of automatic, thrifty growing for consumers around the world.
SOLUTION :
Agro Tech farm is the solution to the above problems raised as ATF targets to produce enough organic food that can meet the demands of the market. It wants to ensure that everyone gets ample amount of organic food to feed and at the same time environment is also not adversely affected by their production.
ATF plans to employ its equipments and tools to carry out mass production of food without harming the natural aspect of our environment. The advanced technology used in the equipments of ATG will enable automatic growth of the plants without any regulations or supervision or involvement of any person in the process of vegetation.There is a specially designed L.E.D lamp which is used to carry out the photosynthesis process even in the absence of sunlight. These lamps consume a very little amount of electricity and also accelerates faster growth of vegetation. There is an optimum temperature selection for all plants that helps in the healthy growth. ATF facilitates automatic irrigation without involving any anyone. It automatically adds nutrition to the crops and maintains a optimum moisture to enhance their yield. The solution recuperation system, pointwise dosing of nutrition, automatic irrigation according to the plant requirements, use of beneficial bacteria, etc are some of the plentiful resources for the finest growth of all plants.
FACTORS AFFECTING THE DEVELOPMENT OF PLANTS
- Limited range of plant products available on the market: It is due to the fact that modern plant growing by the method of protected soil is often represented by large agroholdings specializing in growing a narrow range of food crops such as tomatoes, cucumbers and lettuce.
- High level of seed money: The high level of seed money required to create a business in the field of plant growing, which significantly reduces the number of small farms in this sector and thereby increases the share of imported products in the food market.
- The inability to grow vegetables in some countries because of weather conditions, or lack of fertile land.
- The lack of full control over the quality indicators of the crop production supplied: Because of the long logistics chain, manufacturers betake to various methods of conservation and long-term storage in order to preserve the marketable condition of products. Often, these methods are harmful to human health and affect the environmental characteristics of the grown produce.
TECHNOLOGY
- Hydroponics and Aeroponics: An essential difference of our solution is application of the combined method of plant cultivation in an enclosed space, at which the nutrient solution enters the root zone in the form of small particles of water providing high oxygenation of the solution, and a two-circuit overflow-draining system allows monitoring the level of the solution in the root zone. The developed technique and design allows to model the necessary level of moisture in the substrate, ensures a uniform distribution of the necessary dissolved nutrients and oxygen at the roots and excludes the need for human participation in the growing process already at the stage of planting the seeds. There are no injectors or splicers in the system, which significantly increases the reliability of the system and eliminates the need for serial cleaning, replacement of nozzles/splicers and cleaning filters. The system provides for the protection of plants from drying during malfunctions in the operation of the electric system and switching off the electric power of the actuators for 2-6 hours (depending on the type of plants).
- Lighting: When cultivating plants in enclosed spaces or in conditions of limited natural sunlight, it is necessary to use artificial light sources. At different stages of plant life for normal morphological development and depending on the type of crops, the spectral composition of light varies significantly. For the purpose of applying a single source of illumination for growing different cultures and optimizing the process of photosynthesis inside plants, a luminaire with the use of light-emitting diodes has been developed, which allows changing not only the intensity of light but the ratio of the spectral composition depending on the culture, growth stage and plant height. The illumination system includes LED luminaires modeling the spectrum from 440 to 740 nm and the power level depending on the stage of growth, the lateral system of plant clearance in the late stages of growth, the system of imitation of sunrise and sunset. The intelligent lighting system, depending on the type of plant and its measured morphological data, independently adjusts the light flux.
- Ventilation: To optimize the process of photosynthesis in plants, especially in closed rooms, it is necessary to regularly update the composition, as well as maintain the desired level of humidity and air temperature. It is worth noting that the optimal climate parameters for each plant species are individual, therefore, when creating modern plant cultivation systems in a closed way, controlled climate systems are more often able to model the required parameters depending on the type of plants. The developed system of air recuperation allows excluding the use of air conditioning systems in a climate close to home, which significantly reduces the cost and eliminates the procedure for servicing the air conditioning system operating on the principle of a vapor compression cycle, and also reduces energy consumption. Pollination of plants occurs automatically by supplying air masses to the plant, which allows excluding the participation of a person in this process without damage to the crop. Streams of air swing plants strengthening its central trunk and allowing even more efficient transport of nutrients to leaves, flowers, and fruits.
- Top-dressing with CO2: The modification includes a node for top-dressing of plants with carbon dioxide, which is especially useful to accelerate the set of vegetative mass by the plant, in the day phase, and in the growth chamber. Carbon dioxide is one of the most important building elements, so its availability and control are so necessary.
- Air cleaning: For people with an allergic reaction to plants or when growing plants that have a persistent smell, a two-stage air filtration system is used. Coming from the temperature rise/fall circuits, air enters the carbon filter chamber, where the volatile and semi-volatile organic compounds of the gas molecule are absorbed by the pores of the activated carbon. However, in conditions of high humidity during the growing process, and the presence of molecules with a fine molecular weight, the carbon filtration provides only a part of the required degree of air purification. In order to capture molecules that have passed through the carbon filter, an ionized air purification unit is used. This method of filtration is absolutely safe for humans and at the same time, it has a long working life. Thus, two-stage air purification is most useful for combating unpleasant odors.
- Nutrients: The automatic solution unit monitors the level, the electrical conductivity of the EС, the acidity of pH, the temperature of the nutrient solution and maintains the chosen formulation of nutrient solutions for a particular plant species throughout the process. The composition of nutrients is a key parameter in modern plant growing, which is why its control and accuracy is so important. Manual mixing can be quite tricky since more than twenty elements are required for plant growth. The main elements, carbon, hydrogen, and oxygen, are absorbed from air and water. The remaining elements, called mineral nutrients, are mixed in solution in certain proportions. Any good hydroponic nutrient solution should contain all these elements: nitrogen (N), potassium (K), phosphorus (P), calcium (Ca), magnesium (Mg), sulfur (S), iron (Fe), manganese (Mn), copper (Cu), zinc (Zn), molybdenum (Mo), boron (B), chlorine (Cl). To reduce the risk of pathogens in plants and to strengthen the immune system of plants, microorganisms are naturally used that help to eliminate the need for various herbicides, pesticides, and other harmful substances.
ICO
The main-ICO sale will begin from 1st June, 2018 and will continue till 31st July, 2018. The ICO Hard Cap is 20 million USD which amounts for 3,250,000 tokens. However, the total tokens generated will be 5,000,000 out of which 65%or 3,250,000 are for crowdsale, 20% or 500,000 for ATF company, 7% or 350,000 for marketing and 2% or 100,000 for Partners.
Token Information:
Token Name: AgroTechFarm
Token Price: Token (ATF) 1 ATF = 0.012 ETH
Pre-Sales Token: February 16, 2018 - April 20, 2018
Token Sales: June 1, 2018 - July 31, 2018
Token Amount: Up to 1431000
ATF Hard Cap Pre ICO: 500 ETH
Hard Cap ICO: 10'000 ETH
The maximum token distributed through ICO: 1,060,000 ATF
Token Maximum of Purchase: 1 Wei
Maximum Purchase Token: There is no limit
Eligibility: Anyone but permanent residents of Hong Kong, People's Republic of China and the US due to legal restrictions or trade sanctions.
ICO Smart Contract: Mintable
 | |
ATF TEAM ADVISORY
To know more about this project, you can visit:
profile :
|
Komentar
Posting Komentar